2017 Mazda RT24-P

2017 mazda rt24-p – DOC695948

After a few seasons of racing gasoline-powered prototypes in North America, Mazda switched to a diesel engine based on the 2.2-liter SkyActiv-D unit found in its production cars. That didn’t go very well, so the automaker returned to the 2.0-liter gasoline four-pot in 2016, when it continued with the same Lola chassis. With IMSA Prototype class rules revised for 2017, Mazda ditched the old Lola underpinnings in favor of a Riley chassis and redesigned the bodywork of its race car. With rules now more permissive as far as designs go, Mazda came up with a race car that uses many of the Kodo styling cues seen on the company’s production cars.

The new race car will compete in the new DPi class of the IMSA WeatherTech SportsCar Championship. The category replaces last year’s Prototype class and introduces revised regulations to the series. The new Riley chassis was designed and built by Multimatic, while the engine was carried over from last year’s race car.

“This is a huge moment for Mazda Motorsports and the entire Mazda family,” said John Doonan, director of Mazda Motorsports North America. “To have a car which features Mazda design language at the top level of our motorsports program is meaningful for us as a brand. We believe we have the right team, the right drivers and the right chassis to win races and championships.”

Mazda Motorsports will tackle the 2017 season with two vehicles. Car No. 55 will be driven by Jonathan Bomarito and Tristan Nunez, while car No. 77 will be piloted by Joel Miller and Tom Long. The season will commence in Daytona on January 28, while the final race will take place in Georgia on October 7.

Exterior

Mazda Brings Gorgeous Prototype Race Car to L.A.

The exterior design is what makes Mazda’s new race car special. Unlike the outgoing model, the RT24-P is heavily inspired by the company’s Kodo design, especially from the side mirrors toward the nose. The front fascia is highlighted by the familiar five-point grille wearing the same “Mazda” logo as the production cars, while the headlamps are significantly thinner and slightly swept-back, also very similar to the road-going models such as the new CX-5 crossover. The RT24-P also sports very aggressive wide side pods with massive intakes under the butterfly-type doors.

Unlike the outgoing model, the RT24-P is heavily inspired by the company’s Kodo design.

Around back, the RT24-P is not that radical compared to last year’s race car, being similar to other LMP-type prototypes, Highlights include a big fin that stretches from the tip of the roof all the way back toward the rear wing. The wing itself has a rather simple design, but the P-shaped struts that make direct contact with the rear diffuser at the bottom of the rear fenders give it a menacing look. Not surprisingly, Mazda selected a flashy red color based on the production Soul Red for the presentation model.

Interior

Mazda Brings Gorgeous Prototype Race Car to L.A.

The cabin shouldn’t be a lot different than the outgoing race car.

As it is the case with most prototype race cars, Mazda did not release photos of the RT24-P’s interior. There is a photo of the driver-side door through which we can see a tiny bit of the cockpit, but nothing beyond the multi-function steering wheel packed with buttons and some cream-painted elements (rather unusual given that most race cars have all-black interiors). Other than that, the cabin shouldn’t be a lot different than the outgoing race car. The dashboard should be simple and devoid of any car-like elements save for the instrument cluster, which should have a much simpler display. Other highlights should include an aggressively bolstered driver’s seat, lightweight door panels, and a stripped out floor.

Drivetrain

Mazda Brings Gorgeous Prototype Race Car to L.A.

The RT24-P is powered by the same MZ-2.0T engine used in last year’s prototype.

The RT24-P is powered by the same MZ-2.0T engine used in last year’s Mazda Prototype racer. Developed in collaboration with Advanced Engine Research (AER), the turbocharged, 2.0-liter four-cylinder engine is good for “approximately 600 horsepower.” Mazda has nothing else to say about the engine so it’s safe to assume it is actually identical to the one it used in 2016. Some revisions are likely, but they’re probably too minor to mention. While the engine is the same, the chassis is new. Devel oped by Riley Technologies and Multimatic, Mazda’s racing partners for IMSA since 2014, the Riley Mk. 30 underpinnings include some of the latest technologies for prototype racing and should be lighter than last year’s frame.

Competition

The Mazda RT24-P will compete in the new DPi class that replaces last year’s Prototype category in the IMSA WeatherTech SportsCar Championship. Mazda Motorsports will compete against eight other teams using various designs. There will be three Nissan-powered Ligier JS P217 cars run by PR1/Mathiasen Motorsports, Jagonya Ayam/OAK Racing, and Tequila Patron ESM, and two Gibson-powered Riley Mk, 30 prototypes driven by JDC-Miller Motorsports and Starworks Motorsports. Action Express Racing, which previously raced Corvette DPs, and Wayne Taylor Racing will be using Cadillac-powered Dallara LMP2s. Finally, JDC-Miller Motorsports will join the series with a Gibson-powered Oreca 07.

Conclusion

Mazda Brings Gorgeous Prototype Race Car to L.A.

Needless to say, the RT24-P looks unique and incredibly cool for a race car, which are usually designed to be aerodynamic not good looking, but it remains to be seen whether it will have a shot at the championship or struggle to win a few points. But given that Mazda, which used a Lola B08/80 chassis last year, didn’t win races and its best car finished only sixth in the championship, 2017 can only be an improvement. With a better chassis designed by Riley and Multimatic, an engine that has already proven to be reliable, and revised aerodynamics, Mazda should post increasingly better results, while also looking good on the race track.

LOVE IT

  • Stunning exterior design
  • Better chassis
  • Reliable engine

LEAVE IT

  • Stiff competition

Press Release

The new Mazda RT24-P race car was unveiled today at the Los Angeles Auto Show, ushering a new era in the prominent history of Mazda Motorsports’ flagship endeavors in North America. The new car will compete under Daytona Prototype international (DPi) rules in the Prototype class, the top level of the IMSA WeatherTech SportsCar Championship. After significant on-track testing, it will make its racing debut at the 2017 Rolex 24 at Daytona in late January.

KODO Design

Mazda Brings Gorgeous Prototype Race Car to L.A.

Mazda is known globally for the engineering and design excellence of its vehicles, and the new Prototype is no exception. The bodywork of the race car was developed by Mazda designers utilizing the KODO—Soul of Motion design philosophy. KODO represents the instant that energy becomes motion, such as the muscular beauty as an animal pounces or a human leaps into action. The KODO design cues on the Mazda RT24-P include the sleek body contours and the five-point Mazda grille.

“KODO design is at the heart of any vehicle that carries a Mazda badge, and that is very evident in the design of the 2017 Prototype,” said Ken Saward, senior manager of Design at Mazda Design Americas, which falls under the Mazda North American Operations umbrella. “We considered the two main parameters of designing a successful race car for this series: aerodynamic performance and the new-for-2017 technical regulations. Working with Multimatic’s aerodynamicist and engineers, we discovered that applying the KODO design philosophy to the surfaces and the silhouette of the car enabled us to create a dynamic, purposeful-looking design and a very aerodynamically efficient one.”

Mazda Brings Gorgeous Prototype Race Car to L.A.

Managing the two-car Mazda Prototype factory race team is Florida-based SpeedSource Race Engineering. The team will race the new Riley Mk. 30 chassis, developed by Riley Technologies in relationship with Multimatic. Riley Technologies is a prominent chassis design and development company with 99 race wins and nine Prototype season championships in North American endurance racing since 2004. Canadian-based Multimatic has worked with Mazda since 2014 in the Prototype category, and has developed and built some of the world’s premier on-road supercars and successful sports cars for the race track. The Mazda team will be the first to test the Riley Mk. 30 chassis later this month.

The Mazda RT24-P will be powered by the Mazda MZ-2.0T engine which raced during the 2016 IMSA season. The approximately 600-horsepower engine, developed and raced with Advanced Engine Research (AER), is a 2.0-liter, inline four-cylinder turbocharged engine.

Mazda Brings Gorgeous Prototype Race Car to L.A.

“This is a huge moment for Mazda Motorsports and the entire Mazda family,” said John Doonan, director of Mazda Motorsports North America. “To have a car which features Mazda design language at the top level of our motorsports program is meaningful for us as a brand. We believe we have the right team, the right drivers and the right chassis to win races and championships.

“Mazda has good, long-standing relationships with Riley and Multimatic, and is happy to be the first to test their new chassis. We look forward to seeing it make its racing debut at Daytona with Mazda bodywork and the Mazda MZ-2.0T engine. The strategic vision of IMSA to give auto manufacturers this opportunity to integrate our branding —to better engage our passionate fans— is unique and we’re proud to be the first to unveil what is possible.”

Be the first to comment

Leave a Reply

Your email address will not be published.


*


Time limit is exhausted. Please reload CAPTCHA.